Beam waveguide antenna

A beam waveguide antenna is a specific variety of parabolic dish that sends the transmitted or received signal from a stationary transmitter or receiver to a movable dish by means of a beam waveguide. With a conventional parabolic antenna, the transmitter or receiver is mounted at the focus, and moves as the antenna is repositioned to track specific targets. While this works well, the focus is an inconvenient spot to mount transmitters and receivers, since they are complex and high maintenance, and often require special needs such as water cooling for transmitters and cryogenics for sensitive receivers. Furthermore, these units have to be designed to handle outdoor conditions such as rain and large temperature swings, and to work while tipped at any angle. The beam waveguide antenna addresses this problem by relaying the signal to a fixed location in the base of the antenna, no matter where the antenna is pointing.

History

Beam waveguides, which propagate a microwave beam using a series of mirrors, were proposed as early as 1964.[1] By 1968, there were proposals to handle some of the signal path in pointable antennas by these techniques.[2] By 1970, a fully beam-waveguide approach was proposed for satellite communication antennas.[3] At first, this approach was believed to tradeoff performance for convenience,[4] but further analysis showed the waveguide system could be built with very low losses. This led to scientific use, first at 64 meter antenna at the Usuda Deep Space Center.[5] After the Jet Propulsion Lab (JPL) tested this antenna and found it better than their conventional 64-meter antennas,[6] they too switched to this method of construction for all subsequent antennas of their Deep Space Network (DSN).

References

  1. ^ Degenford, J.E. and Sirkis, MD and Steier, WH (1964). "The reflecting beam waveguide". Microwave Theory and Techniques, IEEE Transactions on (IEEE) 12 (4): 445–453. doi:10.1109/TMTT.1964.1125845. ISSN 0018-9480. http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=1125845. 
  2. ^ MILLIMETER-WAVE PROPAGATION AND SYSTEMS CONSIDERATIONS Aerospace report TR-0200(4230-46)-1, L.A. Hoffman, Electronics Research Lab, October 1968, page 69.
  3. ^ Kitsuregawa, T. and Mizusawa, M. (1970). "Design of the beam-waveguide primary radiators of the Cassegrain antennas for satellite communications". Antennas and Propagation Society International Symposium, 1970. 8. IEEE. pp. 400--406. doi:10.1109/APS.1970.1150868. http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=1150868. 
  4. ^ Layland, J.W. and Rauch, L.L. (1995). "The Evolution of Technology in the Deep Space Network: A History of the Advanced Systems Program". National Aeronautics and Space Administration, Jet Propulsion Laboratory, California Institute of Technology. pp. 5. http://deepspace.jpl.nasa.gov/technology/95_20/95-20.pdf. 
  5. ^ Hayashi, T. and Nishimura, T. and Takano, T. and Betsudan, S.I. and Koshizaka, S. (1994). "Japanese deep-space station with 64-m-diameter antenna fed through beam waveguides and its mission applications". Proceedings of the IEEE (IEEE) 82 (5): 646–657. doi:10.1109/5.284732. ISSN 0018-9219. http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=284732. 
  6. ^ Neff, D.. "Use of a 2.3-GHz Traveling-Wave Maser on the Usuda 64-Meter Antenna". TDA Progress Report 42 (JPL) 89: 34--40. http://tmo.jpl.nasa.gov/progress_report/42-89/89C.PDF.